Experimental study of the properties of concrete made with water and sea sand

Loading...
Thumbnail Image

Date

Directores

Journal Title

Journal ISSN

Volume Title

Publisher

Universidad Estatal Península de Santa Elena

Abstract

Description

The construction industry uses increasing volumes of aggregates and fresh water in the production of concrete, with the consequent impacts on the environment. The total or partial replacement of these two resources by water and sea sand can be a feasible solution to the problem. The present research studied the influence of the use of water and sea sand on the properties of concrete at early ages. Concrete density and consistency in the fresh state were evaluated; and density, ultrasonic pulse speed and compressive strength in the hardened state, with 50% and 100% replacement of crushed sand by sea sand, always using sea water. The results allowed to conclude that the properties of concrete with sea sand do not present statistically significant differences with those of the control concrete, highlighting the best results with a 50% replacement.
La industria de la construcción emplea volúmenes crecientes de áridos y agua dulce en la producción de hormigón, con las consecuentes afectaciones al medio ambiente. La sustitución total o parcial de estos dos recursos por agua y arena de mar puede constituir una solución factible al problema. La presente investigación estudió la influencia del empleo de agua y arena de mar en las propiedades del hormigón a edades tempranas. Fueron evaluadas densidad del hormigón y consistencia en estado fresco; y densidad, velocidad del pulso ultrasónico y resistencia a compresión en estado endurecido, con sustitución del 50% y 100% de arena triturada por arena de mar, empleando siempre agua de mar. Los resultados permitieron concluir, que las propiedades del hormigón con arena de mar no presentan diferencias estadísticamente significativas con las del hormigón de control, destacando los mejores resultados con un 50% de sustitución.

Citation